BANGALORE (Head Office)

No 528,8th Main BEML Layout 6Th Stage, ITPL Road, BANGALORE - 560 066

Phone : 080 - 40936722/40936922
Fax : 080 - 40936322
Email : sales@tangenttest.com

CHENNAI (Head Office)

Plot No:34, Door No: 12, F1, Sri Jaya Park, Bharani Colony, Diwakar Street, Saligramam, CHENNAI - 600 093

Phone : 044 - 2365 1146 / 4218 0909
Fax :
Email : sales@tangenttest.com

HYDERABAD (Head Office)

FLAT No. 302, BLISS APARTMENTS, H.No. 1-4-6, STREET No. 7, HABSIGUDA, HYDERABAD - 500 007

Phone : 040-40147045
Fax : 040-40147045
Email : sales@tangenttest.com

NEW DELHI (Head Office)

198-B, Sushant Lok-1, GURGAON - 122 022

Phone : 0124- 4696614
Fax :
Email : sales@tangenttest.com

TALK TO US

* Mandatory fields.











Authorized Dealer

Sales Hotline :
+91-80- 40936322

PRODUCTS

Home > Products > LCR/Impedance Analyzer > LCR Meters > LCR Meter IM3536

LCR Meter IM3536

  • Low-frequency AC-IR measurement* enables faster measurement
  • The BT4560 eliminates the need for charging or discharging by measuring internal impedance at a low frequency of 1 Hz or below
  • Extremely reliable measurements for low-impedance batteries
  • The BT4560 uses a testing current of 1.5 A at the 3mΩ range, which improves the S/N ratio
  •  Circuit configuration highly tolerant of contact and wire resistance to provide stable measurements
  • Simultaneous measurement of impedance and voltage
GET A QUOTE
CATALOG

Expanded measurement range thanks to measurement frequencies from 4 Hz to 8 MHz and a guaranteed accuracy range starting at 1 mΩ

Whereas the legacy model (3532-50) had a measurement frequency band from 42 Hz to 5 MHz, the IM3536 expands this range from 4 Hz to 8 MHz to enable measurement of the characteristics of electronic components used in a multitude of fields. In particular, the LCR meter can accommodate a maximum measurement frequency of 8 MHz when measuring power supply inductors, whose operating frequencies continue to increase.

Faster, higher-precision measurement than the legacy Hioki model

The IM3536 offers improvements in both measurement times and basic accuracy compared to the legacy 3532-50.
Compared to the 3532-50's time of 5 ms (0.005 sec.), the IM3536 is a full five times faster at 1 ms (0.001 sec.). When the instrument is used on an electronic component production line, this improvement translates into increased productivity.

Ability to perform tests with multiple conditions using its continuous measurement function

When evaluating electronic components, it is sometimes necessary to measure a single component using a series of different conditions or parameters. Since the previous product took longer to change measurement conditions and perform measurement, tests requiring use of multiple conditions had to be performed with multiple instruments.

Contact check function for improved test quality

When a measurement probe experiences a wiring break during testing or poor contact with the object under test, the issue can impact the reliability of the resulting measured values, for example by increasing measurement error. To prevent this issue, the IM3536 ships standard with a contact check function that notifies the operator of measurement probe wiring breaks and contact issues. This capability leads to improved test quality