Power Analyzer 3390-10 is an Cutting edge Technology which measure the secondary side of Inverters. Power Analyzer is comprehensive Device Assessment with 4 channel Clamp Input

• High-accuracy model, for comprehensive device assessment
• Super precise ±0.1% accuracy
• Wide-band DC, 0.5Hz to 150kHz
• DC, or Single-phase to 3-phase 4-wire
• 4 ch/ Clamp input

wide bandwidth characteristics capable of measuring the fundamentals of inverters and carrier frequencies. Maximum of 6 input channels lets you measure the input and output of multiple single phase circuits or 3-phase inverters. The power meter can be

• Analysis station for total evaluation
• Wide-band DC, 0.5Hz to 1MHz
• DC, or Single-phase 2-wire to 3-phase 4-wire
• 6ch-Direct/ Clamp input
• Harmonic / Flicker measurement

Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PW6001 is Hioki’s flagship power analyzer, featuring high accuracy, wide band, and high stability for measuring electrical power from DC to inverter frequencies, providing maximum of 12 channels* to support single- and three-phase inverter motor system measurements and next generation devices such as silicon-carbide (SiC) inverters.

• Basic accuracy of ±0.02%*1 for power measurement (*1 PW6001 accuracy only. Instrument delivers accuracy of ±0.07% even after the current sensor accuracy has been added.)
• High noise resistance and stability (80 dB/100 kHz CMRR, ±0.01%/°C temperature characteristics)
• Accurate measurement even when the load is characterized by large fluctuations; TrueHD 18-bit resolution
• 10 ms data refresh while maintaining maximum accuracy (using a specially designed IC to make all measurements independently while performing simultaneous calculations.)
• DC basic accuracy of ±0.07%, which is key for stable, accurate efficiency measurement
• Broad frequency band and sampling that are 10 times better than those of legacy models
• Synchronize 2 units for up to 12 channels*2 in real time
• *2 Two 6-channel models can be connected with an optical connection cable (over a max. length of 500 m) to enable numerical and waveform synchronization.